Advanced Search
Showing products: 26 through 50 (982 total)

Brass Male Inserts

Fabric Hose Sleeve

Unique nylon sleeve that "frizzes" into a self-renewing shield that is extremely resistant to severe abrasion.  Also protects operator.  Down time and maintenance cost are reduced.

Specifications

Application: Maximum protection for an individual hose or group of hoses against physical abrasion and deterioration. Provides burst and containment protection. Meets ISO 6945 abrasion standards.
Color: Black
Features: These nylon sleeves are unique because they form an extra protective layer against abrasive forces. Specifically, thousands of tiny nylon filaments, woven into the texturized yarn, "friz' into a self-renewing shield that is extremely resistant to severe abrasion. Also resists mildew and bacteria growth.
Material: Made of tiny nylon filaments

KLF Series Flow Control Valves

B at the end of the order number denotes that it is brass.

Specifications

Features: Provides metered flow in one direction & free-flow in the reverse direction.
Lock nut included to secure flow setting.
Soft-seat piston check for leak-free service.
Ball check option available for high cycle applications.
Rugged, all-metal construction - no plastic parts.
Maximum operating pressure - 2000 psi for brass.

Male JIC - Female JIC/Female O-Ring Boss

Brand: Taimi

Male JIC to O-Ring Flange 45° - 361

Style: Style 361

Male Pipe x Female Pipe

Brand: Super Swivels

l

Specifications

Features: Available in sizes from 1/4" through 2"
Withstands heavy side loads
Superior quality alloy steel
Chrome ball bearings for long life
Larger ball bearings
No snap ring to blow off
Viton seals standard
Zinc plated
Lower rotating torque
Burnished (micro smooth) barrel bores
Through hardened (not just case hardened)

Male Pipe x Female Pipe (90°)

Brand: Super Swivels

Specifications

Features: Available in sizes from 1/4" through 2"
Withstands heavy side loads
Superior quality alloy steel
Chrome ball bearings for long life
Larger ball bearings
No snap ring to blow off
Viton seals standard
Zinc plated
Lower rotating torque
Burnished (micro smooth) barrel bores
Through hardened (not just case hardened)

Metric Heavy Plug

Style: Style 5203S

MobileCrimp® 4-20 Power Sources - Air Pump

Brand: Gates

Works off standard shop air (90 PSI).  Economical, convenient and versatile for use wherever 90 PSI compressed air is available.

Specifications

Pressure Rating: 10,000 psi
Weight: 10.0 lbs

Permco Filter Spin-On Heads

Brand: Permco

Power Crimp® 707 Crimper

Brand: Gates

The Gates Power Crimp 707 is the most precise, yet simplest crimper made.  It was the first crimper with electronic digital readout to indicate gauge setting.  The toughest part about using the 707 is pushing a button.  It takes just a few seconds to make factory-quality hose assemblies.  Crimps hydraulic hoses from low pressure return lines to extremely high pressure spirals, from 3/16" to 1 1/4" I.D.  Crimps straight and bent tube stems, plus 45° and 90° block types.

 

Specifications

Dimensions: 13" wide by 12" deep by 26 1/2" high.
Maximum Working Pressure: 4900 psi
Production Rate: 100 assemblies per hour (using 1/2" I.D. two-wire straight thread assemblies).
Weight: 188 lbs.

PowerClean™ Pressure Wash Hose - 2 Wire Braid

Brand: Gates

Medium Pressure Hydraulic Power Clean Pressure Washer Hose.  2-Wire Braid Hose.  1-Wire Braid Hose available.  See PowerClean™ Pressure Washer Hose - 1-Wire Braid.

Specifications

Caution: Use Bend Restrictors to extend service life. Not recommended for steam service.
Coupling Recommendations: 74 MegaCrimp® Couplings.
Cover: Type C2 (Modified Nitrile). Black. Specially compounded to handle pressure washer environment.
Recommended For: Heavy duty use on hot and cold water high pressure cleaning equipment where heavy duty service is required. Flexible.
Reinforcement: High tensile steel two wire braid.
Temperature Range: -40º C to + 100º C (-40º F to + 212º F). Increased operating temperatures will reduce hose assembly service life.
Tube: Black. Specially compounded to handle high pressure water service.

Prince Model RV Differential Poppet Inline Relief Valve

Brand: Prince

The Prince valve model RV is a differential poppet type inlet relief.  The valve is made up of a relief cartridge and a cast iron valve body.  The differential poppet type relief provides smooth quiet performance with a minimum variation between cracking and full flow pressures.  This type relief is also less sensitive to system contamination.  The model RV is well suited as a system relief up to 30 GPM and 3000 PSI.  It is available in two pressure ranges and both an externally adjustable and shim adjustable version.

Specifications

Capacity: 30 GPM max inlet flow
Maximum Operating Pressure: 3000 PSI

Prince SP25A Series Hydraulic Gear Pump

Brand: Prince

Style: SAE "B" Flange Pump - 2 Bolt Mount

The SP25A pump now utilizes self-lubricating thrust blocks that eliminate the need for seperate wear plates.  They are made from a high strength aluminum alloy with exceptional anti-galling properties.  This new thrust block design also incorporates advanced bearings designed specifically for high pressure hydraulic pumps.  This new bearing features a robust fluropolymer PTFE wear surface that yields unsurpassed load carrying capabilites and cavitations resistance even at low speeds and moderate levels of contamination.  Also, since the PTFE resin layer is self-lubricating, contamination from bearing wear in high load situations (when no oil film is present) is reduced.  This new thrust block design combined with these advanced bearing results in lower friction and less internal oil loss resulting in higher pump efficiencies.

 

Specifications

Features: Patented Non-Symmetrical Gears - the adoption of non-symmetrical gears insures greater power per unit volume compared with pumps of conventional design. The compact gear compartment has enabled high-pressure operation. The increased number of gear teeth has reduced the flow pulsation and minimized the noise.
Bearings - PTFE composite bearings are used due to the ability to handle heavy loads, low shaft speeds, and high levels of contamination.
Gears and Drive Shaft - Made of hardened alloy steel of one piece construction.
Special Gear Design - Non-symmetrical gear insures low noise and compactness.
Highest Quality Workmanship - Proudly made in the USA!
Pressures up to 3000 PSI.
Dependable Service - Balanced pressure loading insures small dispersion, good durability and maintains high performance.
Extremely efficient.
Perfect Alignment - "Through bore" design provides perfect alignment of pump element and assures even bearing load.
With the aluminum alloy casing, the SP Series features light weight and easy handling.
Working oil - a mineral based oil with additives to resist corrosion, oxidation, and foaming is recommended. Viscosity at any running condition should be 60 SUS minimum and 250 SUS maximum. 180°F is the maximum recommended system operating temperature.
Per ISO cleanliness code level 17/14. As a minimum, 10 micron filtration is recommended.

Prince Wolverine Log Splitter Valves

Brand: Prince

Features:

  • Pressure release detent at end of retract stroke/detent in spool in position
  • Relief set to 2,250 PSI
  • Max tank port pressure 500 PSI
  • Max operating temperature 180°F

Sleeve Bushing Pumps

Brand: Permco

We carry the following Permco Series Numbers for Sleeve Bushing Pumps: P124, P197, P257, and P360.  Click on the 'details' button to see a list of specifications for each series.

Stainless Steel Roller Chain

Steel Upright Truck Mount Hydraulic Tanks

Specifications

Features: Steel tank assembly with diamond plate top section, fully baffled, two 2" NPT bottom ports, internally diffused, dual mounting rails (2"x2") welded tank assembly
Tank is powder coated black
Filtered mushroom vent in tank top for increased air exchange
Filler/breather assembly-including -40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure
Includes ASK200 mounting and spring kit: four pre-drilled powder coated mounting angles, platted bolts, washers, lock-nuts, four plated springs and four pre-drilled mounting pads
Oil level and temperature sight gauge

Aluminum Upright Truck Mount Tanks

Specifications

Features: Total aluminum construction, top tank section built of Bright Diamond plate, balance bright mill finish, fully baffled.
Two heavy duty machined 2" NPT bottom ports, internally diffused
Filtered mushroom vent in tank top for increased air exchange
Filler/breather assembly-including -40 micron filter/breather cap (chain mounted) with nylon strainer basket and bayonet closure
Dual mounting rails (2"x2") welded to tank assembly
Mounting kit includes four pre-drilled powder coated mounting angles, plated bolts, washers, lock-nuts, four plated springs, and four pre-drilled mounting pads
Oil level and temperature sight gauge

Bezares 3000 Series Truck PTOs

Brand: Bezares

The 3000 Series PTO is designed for the Allison AT/MT/HT model transmissions.  This PTO has a low profile housing for easier mounting and is available with various outputs, ratios as well as either electric over hydraulic or air shift options.

Clamp Style Couplers

Dump Pumps

Brand: Permco

We carry the following Permco series numbers for Dump Pumps:  DM, DMD, DMR, and DG.

 

THE ONLY DUMP PUMP MADE IN THE USA!

Male JIC (37°) x Female Pipe (NPT)

Brand: Super Swivels

Specifications

Features: Available in sizes from 1/4" through 2"
Withstands heavy side loads
Superior quality alloy steel
Chrome ball bearing for long life
Larger ball bearings
No snap ring to blow off
Viton seals standard
Lower rotating torque
Zinc plated
Lower rotating torque
Burnished (micro smooth) barrel bores
Through hardened (not just case hardened)

Male JIC to O-Ring Flange 90° - 362

Style: Style 362

Male JIC x Female Pipe

Brand: Taimi

Showing products: 26 through 50 (982 total)